20-Gallon Two Stage Gasoline AGW-SH22-20M
Maximum performance in a single machine, the industrial air compressor, generator, welder combination can tackle any job in the shop or in the field.
Compressor Pump: Cast iron compressor pump · Splash lubricated · Stainless-steel braided discharge hose · Large canister intake filter · Oil level sight indicator
Generator: Brush-type 2 pole 120V/240V alternator · Total harmonic distortion (THD) less than 6% · 100% copper windings
Welder: Amperage selection switch, 170A or 220A maximum
Frame: Powder coated ASME receiver tank · 14-gauge four-piece belt guard
Components: Regulator and two gauges for tank and outlet pressure · Manual drain valves for proper maintenance · 16.5-inch fly wheel
AGW Series Operation
Generator Mode: AC current only · Selector switch set to idle down · Switch is set to full throttle
Welder Mode: DC current only · Engine must be running full throttle · Selector switch must be set to full throttle
All models sold in California are required to have the AX-0080 CARB compliant fuel tank.
Equipped with 150-PSI maximum rated regulator.
Specifications
| Displacement/Engine | 688cc Honda GX690 OHV with electric start - cables are included; battery not included |
| Rated Speed | 3600 RPM |
| Compressor - CFM @ 90 PSI | 30.5 |
| Compressor - CFM @ 175 PSI | 29.0 |
| Compressor - Tank Size | 20-gallon |
| Generator - Max. AC Output | 5000 watts |
| Generator - Rated AC Output | 4500 watts |
| Generator - Alternator Wattage - Cont. On-Load @ 90 PSI | 4500 watts |
| Generator - Alternator Wattage - Cont. On-Load @ 175 PSI | 4500 watts |
| Generator - Frequency/Voltage | 60Hz/120V/240V |
| Generator - Max. Amps (120V/240V) | 41.5/20.8 |
| Generator - Cont. Amps (120V/240V) | 37.5/18.8 |
| Generator - Receptacles | (2) 120V, 20A GFCI duplex; (1) 120V/240V, 20A twist lock |
| Welder - Duty Cycle (10 min. Run Time) | 220A @ 40%, 190A @ 60%, 150A @100% |
| Welder - DC Voltage | 50-220A Working Range |
| Fuel Tank | 10-gallon |
Weights & Dimensions
| Net Weight | 803.00 lbs. |
| Shipping Weight | 870.00 lbs. |
| Length | 47.00 in. |
| Width | 24.00 in. |
| Height | 50.00 in. |
Vibration Isolator Pads IX-0001
Recommended for models mounted in service truck applications. Isolators protect the unit from vibration during use.
California Compliant Fuel Tank AX-0080
Replaces the EPA plastic fuel tank with a CARB approved tank; required for California models
