Base Mount Two Stage Gasoline AGW-SV14-B

This AGW Series combines an air compressor, generator and welder into one machine, making it the complete on-site unit to efficiently tackle numerous jobs at once.

Compressor Pump:
·Cast iron compressor pump
·Splash lubricated
·Stainless-steel braided discharge hose
·Large canister intake filter
·Oil level sight indicator

Generator:
·Brush-type 2 pole 120V/240V alternator
·Total harmonic distortion (THD) less than 6%
·100% copper windings

Welder:
·Amperage selection switch, 170A or 220A maximum

Frame:
·Powder coated ASME receiver tank · Powder coated two-piece belt guard

Components:
·Regulator and two gauges for tank and outlet pressure
·Manual drain valves for proper maintenance
·16.5-inch fly wheel

Limited Warranties:
·2 year alternator
·2 year pump exchange
·3 year Vanguard engine

AGW Series Operation
Generator Mode:
·AC current only
·Selector switch set to idle down
·Switch is set to full throttle
Welder Mode:
·DC current only
·Engine must be running full throttle
·Selector switch must be set to full throttle

Electric start – battery and battery cables not included.

Equipped with 150-PSI maximum rated regulator.

Specifications

Displacement/Engine	408cc Vanguard OHV
Rated Speed	3600 RPM
Compressor - CFM @ 90 PSI	16.4
Compressor - CFM @ 175 PSI	15.7
Compressor - Tank Size	Base-Mount
Generator - Max. AC Output	5000 watts
Generator - Rated AC Output	4500 watts
Generator - Alternator Wattage - Cont. On-Load @ 90 PSI	3000 watts
Generator - Alternator Wattage - Cont. On-Load @ 175 PSI	2500 watts
Generator - Frequency/Voltage	60Hz/120V/240V
Generator - Max. Amps (120V/240V)	41.5/20.8 off-load
Generator - Cont. Amps (120V/240V)	37.5/18.8 off-load
Generator - Receptacles	(2) 120V, 20A GFCI duplex; (1) 120V/240V, 20A twist lock
Welder - Duty Cycle (10 min. Run Time)	150A @ 100%
Welder - DC Voltage	50-170A working range
Fuel Tank	1.53-gallon