30-Gallon Two Stage Gasoline AGW-SM14-30M

Maximum performance in a single machine, the industrial air compressor, generator, welder combination can tackle any job in the shop or in the field.

Compressor Pump: Cast iron compressor pump · Splash lubricated · Stainless-steel braided discharge hose · Large canister intake filter · Oil level sight indicator

Generator: Brush-type 2 pole 120V/240V alternator · Total harmonic distortion (THD) less than 6% · 100% copper windings

Welder: Amperage selection switch, 170A or 220A maximum

Frame: Powder coated ASME receiver tank · 16-gauge powder coated two-piece belt guard

Components: Regulator and two gauges for tank and outlet pressure · Manual drain valves for proper maintenance · 16.5-inch fly wheel

AGW Series Operation
Generator Mode: AC current only · Selector switch set to idle down · Switch is set to full throttle
Welder Mode: DC current only · Engine must be running full throttle · Selector switch must be set to full throttle

All models sold in California are required to have the AX-0080 CARB compliant fuel tank.
Equipped with 150-PSI maximum rated regulator.

Specifications

Displacement/Engine 420cc Mi-T-M OHV with electric start - battery and battery cables not included
Rated Speed 3600 RPM
Compressor - CFM @ 90 PSI 16.4
Compressor - CFM @ 175 PSI 15.7
Compressor - Tank Size 30-gallon
Generator - Max. AC Output 5000 watts
Generator - Rated AC Output 4500 watts
Generator - Alternator Wattage - Cont. On-Load @ 90 PSI 3000 watts
Generator - Alternator Wattage - Cont. On-Load @ 175 PSI 2500 watts
Generator - Frequency/Voltage 60Hz/120V/240V
Generator - Max. Amps (120V/240V) 41.5/20.8 off-load
Generator - Cont. Amps (120V/240V) 37.5/18.8 off-load
Generator - Receptacles (2) 120V, 20A GFCI duplex; (1) 120V/240V, 20A twist lock
Welder - Duty Cycle (10 min. Run Time) 150A @ 100%
Welder - DC Voltage 50-170A working range
Fuel Tank 1.85-gallon

Weights & Dimensions

Net Weight 585.00 lbs.
Shipping Weight 650.00 lbs.
Length 46.00 in.
Width 22.00 in.
Height 47.00 in.

Vibration Isolator Pads IX-0001

Recommended for models mounted in service truck applications. Isolators protect the unit from vibration during use.

Battery Tray, Box and 2-Foot of Cables AX-0070

Attaches to engine side of unit

Battery, Battery Tray, Box and 2-Foot of Cables AX-0016

Attaches to engine side of unit

Request More Information

Customer Service